H3C Technologies H3C SecBlade LB Cards - Manual (Page 164)

154
Disabling password recovery capability
Password recovery capability controls console user access to the device configuration and SDRAM from
BootWare menus.
If password recovery capability is enabled, a console user can access the device configuration without
authentication to reconfigure new passwords.
If password recovery capability is disabled, a console user must restore the factory-default configuration
before configuring new passwords. Restoring the factory-default configuration deletes the next-startup
configuration file.
To enhance system security, disable password recovery capability.
To disable password recovery capability:
Step Command Remarks
1. Enter system view. system-view N/A
2. Disable password
recovery capability. undo password-recovery
enable
By default, password recovery capability is
enabled.
Examining the state of password recovery
capability
1. Reboot the device.
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare........
The Extend BootWare is self-decompressing...................................
......Done!
****************************************************************************
* *
* H3C SecPath BootWare, Version 1.06 *
* *
****************************************************************************
Copyright (c) 2004-2013 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : Feb 27 2013
CPU Type : XXXX
CPU L1 Cache : 32KB
CPU Clock Speed : 1000MHz
Memory Type : DDR2 SDRAM
Memory Size : 4096MB
Memory Speed : 533MHz
BootWare Size : 768KB
Flash Size : 1024MB