H3C Technologies H3C SecBlade LB Cards - Manual (Page 21)

11
Figure 11 Setting the properties of the serial port
5. Power on the LB product and press Enter at the prompt.
Figure 12 CLI
6. At the default user view prompt , enter commands to configure the LB product or view the
running status of the LB product. To get help, enter ?.
Configuring console login control settings
The following authentication modes are available for controlling console logins:
• None—Requires no authentication. This mode is insecure.
• Password—Requires password authentication.
• Scheme—Uses the AAA module to provide local or remote console login authentication. You must
provide a username and password for accessing the CLI.