H3C Technologies H3C SecBlade LB Cards - Manual (Page 152)

142
Step Command Remarks
5. Read, restore, back up, or
upgrade the BootWare
program on the device in user
view.
bootrom { backup | read | restore
| update file file-url } [ all | part ]
If neither the all keyword nor the
part keyword is specified, the
specified action applies to the
entire BootWare image.
6. Reboot the device. reboot N/A
Upgrading the system software
You can upgrade the system software image in the Web interface or at the CLI.
Upgrading system software in the Web interface
IMPORTANT:
Upgrading software takes some time. During software upgrade, do not perform any operation on the
Web interface. Otherwise, the upgrade might be disrupted.
To upgrade software:
1. Select System > Software Upgrade from the navigation tree.
Figure 91 Software upgrade configuration page
2. Configure upgrade parameters as described in Table 22 .
3. Click Apply.
Table 22 Configuration items
Item Description
File
Specify the filename of the local system software image file, which must have the
extension .app or .bin.