H3C Technologies H3C S12500 Series Switches User Manual

Page 71

[RouterA-GigabitEthernet3/0/1] quit

[RouterA] interface GigabitEthernet 3/0/2

[RouterA-GigabitEthernet3/0/2]port link-mode route

[RouterA-GigabitEthernet3/0/2] pim dm

[RouterA-GigabitEthernet3/0/2] igmp enable

Configure Switch A:
# Enable IGMP snooping globally.

system-view

[SwitchA] igmp-snooping

[SwitchA-igmp-snooping] quit

# Create VLAN 2 through VLAN 5.

[SwitchA] vlan 2 to 5

# Configure GigabitEthernet 3/0/2 as a trunk port, and assign it to VLAN 2 and VLAN 3.

[SwitchA] interface GigabitEthernet 3/0/2

[SwitchA-GigabitEthernet3/0/2] port link-type trunk

[SwitchA-GigabitEthernet3/0/2] port trunk permit vlan 2 3

[SwitchA-GigabitEthernet3/0/2] quit

# Configure GigabitEthernet 3/0/3 as a trunk port, and assign it to VLAN 4 and VLAN 5.

[SwitchA] interface GigabitEthernet 3/0/3

[SwitchA-GigabitEthernet3/0/3] port link-type trunk

[SwitchA-GigabitEthernet3/0/3] port trunk permit vlan 4 5

[SwitchA-GigabitEthernet3/0/3] quit

# Create VLAN 10, assign GigabitEthernet 3/0/1 to this VLAN, and enable IGMP snooping in
the VLAN.

[SwitchA] vlan 10

[SwitchA-vlan10] port GigabitEthernet 3/0/1

[SwitchA-vlan10] igmp-snooping enable

[SwitchA-vlan10] quit

# Configure VLAN 10 as a multicast VLAN and configure VLAN 2 through VLAN 5 as its

sub-VLANs.

[SwitchA] multicast-vlan 10

[SwitchA-mvlan-10] subvlan 2 to 5

[SwitchA-mvlan-10] quit

Configure Switch B:
# Enable IGMP snooping globally.

system-view

[SwitchB] igmp-snooping

[SwitchB-igmp-snooping] quit

# Create VLAN 2, assign GigabitEthernet 3/0/2 to VLAN 2, and enable IGMP snooping in the

VLAN.

[SwitchB] vlan 2

[SwitchB-vlan2] port GigabitEthernet 3/0/2

[SwitchB-vlan2] igmp-snooping enable

[SwitchB-vlan2] quit

# Create VLAN 3, assign GigabitEthernet 3/0/3 to VLAN 3, and enable IGMP snooping in the
VLAN.

This manual is related to the following products: