Displaying and maintaining ipv6 pim snooping, Ipv6 pim snooping configuration example, Network requirements – H3C Technologies H3C S12500 Series Switches User Manual
Page 334
318
Displaying and maintaining IPv6 PIM snooping
Task Command
Remarks
Display IPv6 PIM snooping
neighbor information (in
standalone mode).
display pim-snooping ipv6 neighbor [ vlan vlan-id ]
[ slot slot-number ] [ | { begin | exclude | include }
regular-expression ]
Available in any view.
Display IPv6 PIM snooping
neighbor information (in IRF
mode).
display pim-snooping ipv6 neighbor [ vlan vlan-id ]
[ chassis chassis-number slot slot-number ] [ | { begin
| exclude | include } regular-expression ]
Available in any view.
Display IPv6 PIM snooping
routing entries (in
standalone mode).
display pim-snooping ipv6 routing-table [ vlan
vlan-id ] [ slot slot-number ] [ | { begin | exclude |
include } regular-expression ]
Available in any view.
Display IPv6 PIM snooping
routing entries (in IRF
mode).
display pim-snooping ipv6 routing-table [ vlan
vlan-id ] [ chassis chassis-number slot slot-number ]
[ | { begin | exclude | include } regular-expression ]
Available in any view.
Display the statistics for IPv6
PIM messages learned by
IPv6 PIM snooping.
display pim-snooping ipv6 statistics [ | { begin |
exclude | include } regular-expression ]
Available in any view.
Clear the statistics for IPv6
PIM messages learned by
IPv6 PIM snooping.
reset pim-snooping ipv6 statistics
Available in user view.
IPv6 PIM snooping configuration example
Network requirements
As shown in
, Source 1 sends multicast data to IPv6 multicast group FF1E::101, and Source 2
sends multicast data to IPv6 multicast group FF2E::101. Receiver 1 belongs to multicast group FF1E::101,
and Receiver 2 belongs to multicast group FF2E::101. Router C and Router D run MLD on their interface
GigabitEthernet 3/0/1. Router A, Router B, Router C, and Router D run IPv6 PIM-SM, and interface
GigabitEthernet 3/0/2 on Router A acts as a C-BSR and C-RP.
Configure MLD snooping and IPv6 PIM snooping on Switch A so that Switch A forwards IPv6 PIM
messages and multicast data to only the routers that are interested in the multicast data.