H3C Technologies H3C S12500 Series Switches User Manual

Page 284

268

[CEa2] interface vlan-interface 16

[CEa2-Vlan-interface16] ip address 10.110.12.1 24

[CEa2-Vlan-interface16] pim sm

[CEa2-Vlan-interface16] quit

# Configure an IP address for Loopback 1, and enable PIM-SM.

[CEa2] interface loopback 1

[CEa2-LoopBack1] ip address 22.22.22.22 32

[CEa2-LoopBack1] pim sm

[CEa2-LoopBack1] quit

# Configure Loopback 1 as a C-BSR and a C-RP for VPN a.

[CEa2] pim

[CEa2-pim] c-bsr loopback 1

[CEa2-pim] c-rp loopback 1

[CEa2-pim] quit

# Configure RIP

[CEa2] rip 2

[CEa2-rip-2] network 10.0.0.0

[CEa2-rip-2] network 22.0.0.0

Configure CE a3:
# Enable IP multicast routing.

system-view

[CEa3] multicast routing-enable

# Configure an IP address for VLAN-interface 50 and enable IGMP and PIM-SM on the interface.

[CEa3] interface vlan-interface 50

[CEa3-Vlan-interface50] ip address 10.110.10.1 24

[CEa3-Vlan-interface50] igmp enable

[CEa3-Vlan-interface50] pim sm

[CEa3-Vlan-interface50] quit

# Configure an IP address for VLAN-interface 17 and enable PIM-SM on the interface.

[CEa3] interface vlan-interface 17

[CEa3-Vlan-interface17] ip address 10.110.5.2 24

[CEa3-Vlan-interface17] pim sm

[CEa3-Vlan-interface17] quit

# Configure an IP address for VLAN-interface 16 and enable PIM-SM on the interface.

[CEa3] interface vlan-interface 16

[CEa3-Vlan-interface16] ip address 10.110.12.2 24

[CEa3-Vlan-interface16] pim sm

[CEa3-Vlan-interface16] quit

# Configure RIP

[CEa3] rip 2

[CEa3-rip-2] network 10.0.0.0

Configure CE b2:
# Enable IP multicast routing.

system-view

[CEb2] multicast routing-enable

# Configure an IP address for VLAN-interface 60 and enable IGMP and PIM-SM on the interface.

This manual is related to the following products: