H3C Technologies H3C S12500 Series Switches User Manual

Page 323

307

[RouterA-GigabitEthernet3/1/1] mld enable

[RouterA-GigabitEthernet3/1/1] pim ipv6 dm

[RouterA-GigabitEthernet3/1/1] quit

[RouterA] interface Gigabitethernet 3/1/2

[RouterA-GigabitEthernet3/1/2] pim ipv6 dm

[RouterA-GigabitEthernet3/1/2] quit

Configure Switch A:
# Enable MLD snooping globally.

system-view

[SwitchA] mld-snooping

[SwitchA-mld-snooping] quit

# Create VLAN 100, assign GigabitEthernet 3/0/1 through GigabitEthernet 3/0/3 to this VLAN,
and enable MLD snooping in the VLAN.

[SwitchA] vlan 100

[SwitchA-vlan100] port GigabitEthernet 3/0/1 to GigabitEthernet 3/0/3

[SwitchA-vlan100] mld-snooping enable

[SwitchA-vlan100] quit

# Configure GigabitEthernet 3/0/3 to be a static router port.

[SwitchA] interface GigabitEthernet 3/0/3

[SwitchA-GigabitEthernet3/0/3] mld-snooping static-router-port vlan 100

[SwitchA-GigabitEthernet3/0/3] quit

Configure Switch B:
# Enable MLD snooping globally.

system-view

[SwitchB] mld-snooping

[SwitchB-mld-snooping] quit

# Create VLAN 100, assign GigabitEthernet 3/0/1 and GigabitEthernet 3/0/2 to this VLAN,
and enable MLD snooping in the VLAN.

[SwitchB] vlan 100

[SwitchB-vlan100] port GigabitEthernet 3/0/1 GigabitEthernet 3/0/2

[SwitchB-vlan100] mld-snooping enable

[SwitchB-vlan100] quit

Configure Switch C:
# Enable MLD snooping globally.

system-view

[SwitchC] mld-snooping

[SwitchC-mld-snooping] quit

# Create VLAN 100, assign GigabitEthernet 3/0/1 through GigabitEthernet 3/0/5 to this VLAN,
and enable MLD snooping in the VLAN.

[SwitchC] vlan 100

[SwitchC-vlan100] port GigabitEthernet 3/0/1 to GigabitEthernet 3/0/5

[SwitchC-vlan100] mld-snooping enable

[SwitchC-vlan100] quit

# Configure GigabitEthernet 3/0/3 and GigabitEthernet 3/0/5 as static member ports for IPv6
multicast group FF1E::101.

[SwitchC] interface GigabitEthernet 3/0/3

This manual is related to the following products: