H3C Technologies H3C S12500 Series Switches User Manual

Page 52

[RouterA] multicast routing-enable

[RouterA] interface GigabitEthernet 3/0/1

[RouterA-GigabitEthernet3/0/1]port link-mode route

[RouterA-GigabitEthernet3/0/1] igmp enable

[RouterA-GigabitEthernet3/0/1] pim dm

[RouterA-GigabitEthernet3/0/1] quit

[RouterA] interface GigabitEthernet 3/0/2

[RouterA-GigabitEthernet3/0/2]port link-mode route

[RouterA-GigabitEthernet3/0/2] pim dm

[RouterA-GigabitEthernet3/0/2] quit

Configure Device A:
# Enable IGMP snooping globally.

system-view

[DeviceA] igmp-snooping

[DeviceA-igmp-snooping] quit

# Create VLAN 100, assign GigabitEthernet 3/0/1 through GigabitEthernet 3/0/3 to this VLAN,
and enable IGMP snooping in the VLAN.

[DeviceA] vlan 100

[DeviceA-vlan100] port GigabitEthernet 3/0/1 to GigabitEthernet 3/0/3

[DeviceA-vlan100] igmp-snooping enable

[DeviceA-vlan100] quit

# Configure GigabitEthernet 3/0/3 to be a static router port.

[DeviceA] interface GigabitEthernet 3/0/3

[DeviceA-GigabitEthernet3/0/3] igmp-snooping static-router-port vlan 100

[DeviceA-GigabitEthernet3/0/3] quit

Configure Device B:
# Enable IGMP snooping globally.

system-view

[DeviceB] igmp-snooping

[DeviceB-igmp-snooping] quit

# Create VLAN 100, assign GigabitEthernet 3/0/1 and GigabitEthernet 3/0/2 to this VLAN,

and enable IGMP snooping in the VLAN.

[DeviceB] vlan 100

[DeviceB-vlan100] port GigabitEthernet 3/0/1 GigabitEthernet 3/0/2

[DeviceB-vlan100] igmp-snooping enable

[DeviceB-vlan100] quit

Configure Device C:
# Enable IGMP snooping globally.

system-view

[DeviceC] igmp-snooping

[DeviceC-igmp-snooping] quit

# Create VLAN 100, assign GigabitEthernet 3/0/1 through GigabitEthernet 3/0/5 to this VLAN,

and enable IGMP snooping in the VLAN.

[DeviceC] vlan 100

[DeviceC-vlan100] port GigabitEthernet 3/0/1 to GigabitEthernet 3/0/5

[DeviceC-vlan100] igmp-snooping enable

This manual is related to the following products: