H3C Technologies H3C S12500 Series Switches User Manual

Page 283

267

# Configure an IP address for VLAN-interface 10 and enable PIM-SM on the interface.

[CEa1] interface vlan-interface 10

[CEa1-Vlan-interface10] ip address 10.110.7.1 24

[CEa1-Vlan-interface10] pim sm

[CEa1-Vlan-interface10] quit

# Configure an IP address for VLAN-interface 11 and enable PIM-SM on the interface.

[CEa1] interface vlan-interface 11

[CEa1-Vlan-interface11] ip address 10.110.2.2 24

[CEa1-Vlan-interface11] pim sm

[CEa1-Vlan-interface11] quit

# Configure RIP

[CEa1] rip 2

[CEa1-rip-2] network 10.0.0.0

Configure CE b1:
# Enable IP multicast routing.

system-view

[CEb1] multicast routing-enable

# Configure an IP address for VLAN-interface 30 and enable PIM-SM on the interface.

[CEb1] interface vlan-interface 30

[CEb1-Vlan-interface30] ip address 10.110.8.1 24

[CEb1-Vlan-interface30] pim sm

[CEb1-Vlan-interface30] quit

# Configure an IP address for VLAN-interface 13 and enable PIM-SM on the interface.

[CEb1] interface vlan-interface 13

[CEb1-Vlan-interface13] ip address 10.110.3.2 24

[CEb1-Vlan-interface13] pim sm

[CEb1-Vlan-interface13] quit

# Configure RIP

[CEb1] rip 3

[CEb1-rip-3] network 10.0.0.0

Configure CE a2:
# Enable IP multicast routing.

system-view

[CEa2] multicast routing-enable

# Configure an IP address for VLAN-interface 40 and enable IGMP and PIM-SM on the interface.

[CEa2] interface vlan-interface 40

[CEa2-Vlan-interface40] ip address 10.110.9.1 24

[CEa2-Vlan-interface40] igmp enable

[CEa2-Vlan-interface40] pim sm

[CEa2-Vlan-interface40] quit

# Configure an IP address for VLAN-interface 14 and enable PIM-SM on the interface.

[CEa2] interface vlan-interface 14

[CEa2-Vlan-interface14] ip address 10.110.4.2 24

[CEa2-Vlan-interface14] pim sm

[CEa2-Vlan-interface14] quit

# Configure an IP address for VLAN-interface 16 and enable PIM-SM on the interface.

This manual is related to the following products: