Ipv6 pim-ssm configuration example, Network requirements – H3C Technologies H3C S12500 Series Switches User Manual
Page 441
425
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFCE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFDE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFEE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
prefix/prefix length: FFFE::/16
RP: 8001::1
Priority: 192
HoldTime: 130
Uptime: 00:03:39
Expires: 00:01:51
IPv6 PIM-SSM configuration example
Network requirements
Receivers receive VOD information through multicast. The receiver groups of different organizations form
stub networks, and one or more receiver hosts exist in each stub network. The entire PIM domain is
operating in the SSM mode.
Host A and Host C are IPv6 multicast receivers in two stub networks N1 and N2.
The SSM group range is FF3E::/64.
MLDv2 runs between Switch A and N1 and between Switch B/Switch C and N2.