H3C Technologies H3C S12500 Series Switches User Manual

Page 297

281

[CEb1-ospf-1] area 0.0.0.0

[CEb1-ospf-1-area-0.0.0.0] network 10.11.0.0 0.0.255.255

[CEb1-ospf-1-area-0.0.0.0] quit

[CEb1-ospf-1] quit

Configure CE a2:
# Enable IP multicast routing.

system-view

[CEa2] multicast routing-enable

# Configure an IP address for VLAN-interface 30 and enable IGMP and PIM-SM on the interface.

[CEa2] interface vlan-interface 30

[CEa2-Vlan-interface30] ip address 10.11.7.1 24

[CEa2-Vlan-interface30] igmp enable

[CEa2-Vlan-interface30] pim sm

[CEa2-Vlan-interface30] quit

# Configure an IP address for VLAN-interface 13 and enable PIM-SM on the interface.

[CEa2] interface vlan-interface 13

[CEa2-Vlan-interface13] ip address 10.11.3.2 24

[CEa2-Vlan-interface13] pim sm

[CEa2-Vlan-interface13] quit

# Configure OSPF.

[CEa2] ospf 1

[CEa2-ospf-1] area 0.0.0.0

[CEa2-ospf-1-area-0.0.0.0] network 10.11.0.0 0.0.255.255

[CEa2-ospf-1-area-0.0.0.0] quit

[CEa2-ospf-1] quit

Configure CE b2:
# Enable IP multicast routing.

system-view

[CEb2] multicast routing-enable

# Configure an IP address for VLAN-interface 40 and enable IGMP and PIM-SM on the interface.

[CEb2] interface vlan-interface 40

[CEb2-Vlan-interface40] ip address 10.11.8.1 24

[CEb2-Vlan-interface40] igmp enable

[CEb2-Vlan-interface40] pim sm

[CEb2-Vlan-interface40] quit

# Configure an IP address for VLAN-interface 14 and enable PIM-SM on the interface.

[CEb2] interface vlan-interface 14

[CEb2-Vlan-interface14] ip address 10.11.4.2 24

[CEb2-Vlan-interface14] pim sm

[CEb2-Vlan-interface14] quit

# Configure an IP address for Loopback 1, and enable PIM-SM.

[CEb2] interface loopback 1

[CEb2-LoopBack1] ip address 3.3.3.3 32

[CEb2-LoopBack1] pim sm

[CEb2-LoopBack1] quit

# Configure Loopback 1 as a C-BSR and a C-RP for VPN b.

This manual is related to the following products: