H3C Technologies H3C S12500 Series Switches - Manual (Page 451)

435
Configuring IPv6 MBGP route redistribution
Step Command Description
1. Enter system view. system-view N/A
2. Enter BGP view. bgp as-number N/A
3. Enter IPv6 MBGP multicast
address family view.
ipv6-family multicast N/A
4. Enable default route
redistribution into the IPv6
MBGP routing table.
default-route imported
Optional.
By default, default route
redistribution is not allowed.
5. Enable route redistribution
from another routing protocol.
import-route protocol [ process-id
[ med med-value | route-policy
route-policy-name ] * ]
Not enabled by default.
If the default-route imported
command is not configured, using
the import-route command cannot
redistribute any IGP default route.
Configuring IPv6 MBGP route summarization
To reduce the routing table size on medium and large BGP networks, you must configure route
summarization on IPv6 MBGP routers. BGP supports only manual summarization of IPv6 multicast routes.
To configure IPv6 MBGP route summarization:
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter BGP view. bgp as-number N/A
3. Enter IPv6 MBGP address
family view.
ipv6-family multicast N/A
4. Configure manual route
summarization.
aggregate ipv6-address prefix-length
[ as-set | attribute-policy route-policy-name
| detail-suppressed | origin-policy
route-policy-name | suppress-policy
route-policy-name ]*
Not configured by default.
Advertising a default route to a peer or peer group
Step Command Remarks
1. Enter system view. system-view N/A
2. Enter BGP view. bgp as-number N/A