Wavetronix Click 500 (programmable controller) (CLK-500) - User Guide User Manual

Page 36

CHAPTER 5 • USING CLICK SUPERVISOR

To open a backup, select the Backups radio button in the lower righthand corner of the

screen. All the backups currently saved in the correct folder will appear (see Figure 5.6).

Select the backup you wish to open and click OK.

Figure 5.6 – Selecting a Backup

Note

The default folder to save backups in is C:\Program Files\Wavetronix\ClickHome\
Drivers\ [model number] \User. If you try to save the files elsewhere, the program will
still save them in the User folder.

After you’ve finished configuring a device, you can connect to another one by returning to

the Communication screen, closing the connection, and connecting to a different device.

This manual is related to the following products:

Click 510 (communication tester) (CLK-510) - User Guide Click 511 (digital I/O repeater) (CLK-511) - User Guide Click 512 (vehicle alert) (CLK-512) - User Guide Click 513 (traffic alert) (CLK-513) - User Guide Click 514 (event logger) (CLK-514) - User Guide