Wavetronix Click 500 (programmable controller) (CLK-500) - User Guide - Manual (Page 7)

6 INTRODUCTION • CLICK 500 SERIES USER GUIDE
Click Supervisor software, which is used with certain Click devices for configuration.
For a list of Click 500 series devices that use Click Supervisor, see the beginning of
Chapter 4.
A few Click devices differ from what is written in the common information chapters
in the way they are installed or the software used to configure them. In the event that a
Click device departs from what is written in Part I, that difference will be noted in that
device’s chapter in Part II.
˽ Part II: Individual Click 500 Series Modules – This part contains a chapter for every
device in the Click 500 series. Each chapter has an introduction to the device along
with a description of the device’s physical features and sections on installation, configu-
ration, troubleshooting and more.