QuickLabel Designer Pro - Manual (Page 71)

- 71 -
3. Click on the Finish button.
You will see that ‘RFID Tag’ command is enabled in the Toolbox on the left side of the
labeling software working window.
RFID Tag is available for use
4. Click on the RFID Tag option in the Toolbox and define the data you want to encode
into the RFID tag.
Encode RFID Tag
The RFID tags embedded into the label are usually of two types: ISO tags, which encode blocks of
data; or UHF tags, which can encode one string of data.
1. Click on the button in the Toolbox to begin encoding the data. The
RFID Tag dialog box opens.