QuickLabel Designer Pro - Manual (Page 12)

- 12 -
Printer Installation Using the Printer Installation Wizard
1. Put the product CD in your CD-ROM drive. The main installation application should
start automatically. If not, start Windows Explorer, browse to the CD and double click
on the file START.EXE.
2. Click on Installation. A new window will open showing all software editions and
printer drivers.
3. Click on NiceDrivers. The printer installation wizard will start.
4. Select your printer from the list. Click on the Next button.
5. Select the port where you have connected your printer and click on the Finish button.
Note:
If you have downloaded the installation for NiceDriver from the product web site, run the down-
loaded executable file and follow the steps four (4) and five (5).
Printer Installation Using the Windows Add Printer Wiz-
ard
1. Open Control Panel from Settings option in Start menu.
2. Open Printers (Printers and Faxes) and select Add a Printer.
3. Follow the Add Printer Wizard prompts. The actual steps vary depending on the version
of your Windows operating system. It is only important to click on the Have disk button
in the step where you can select printer manufacturer and model.
4. Put the product CD in your CD-ROM drive (if not already done so) and browse to the
folder \Drivers.
5. Select the folder of your printer name and click on Open/OK buttons to return to the
Add Printer Wizard. You will see the list of all available printer models of the selected
printer.
6. Select your model, click on the Next button and finish the installation.
Note:
Windows 2000, XP, Vista, 2008 and 7 might prompt you to cancel the installation process because
NiceDrivers do not have the digital signature by Microsoft. It is safe to continue with the installation
at this point. NiceDrivers have not been certified by Microsoft but have been subject of intensive
pre-release testing and comply with Microsoft's demands for printer drivers.
Installing Network Edition
Overview
The Network software consists of two parts: the server and the workstation.
First, you must install the labeling software on the server computer and make all files accessible to
the clients. Then you can install the labeling software on the workstation (client). Client installation