QuickLabel Designer Pro - Manual (Page 25)

- 25 -
Internet activation website
6. Click on the Activate button to retrieve the Activation code. Write it down.
Note:
The Key and Registration numbers, the Activation code and information in other fields are case sen-
sitive, so be careful when writing down the numbers.
7. Go back to the client computer where the window Manage License is still open.
8. Enter the Activation code.
9. Click on the Next button and follow the prompts to complete the activation process.
Activate Additional Network Clients
The Network client you have used for activation of the Network server is activated automatically as
well. To activate additional Network clients on other workstations please follow these steps:
1. Install labeling software on the workstation.
2. Start the labeling software. No valid license is found and the window Manage License
opens.
3. Select Network Software Key and click on Next.
4. Browse for the location where the Network edition was installed and click on the Next
button.
The license information will be copied from the server.