QuickLabel Designer Pro - Manual (Page 35)

- 35 -
Setting up the Software
User Interface
Basic and Advanced User Interface
The labeling software has two-level user interface. By default, basic user interface is enabled that
makes the software easier to use for beginners and inexperienced users.
Software in basic mode:
l
Hides the advanced tabs in dialog boxes.
l
Enables all wizards for frequent tasks in label design.
l
Hides the advanced Toolbars.
l
Shows large icons.
To switch between basic and advanced modes, do the following:
1. Click on the User Interface command in the Tools menu.
2. Click on the command Set Basic Mode to enable basic mode or
click on the command Set Advanced Mode to enable advanced mode.
Note:
You can also enable only some properties of the basic/advanced mode. Look at the other User
Interface options in the Tools menu.
Shortcuts
You can quickly accomplish tasks you perform frequently by using shortcut keys - one or more keys
you press on the keyboard to complete a task. Note that this is just a faster and more convenient way
of choosing commands. Command itself is executed just as if it was selected from the menu or tool-
bar.
Shortcut Command
Delete Deletes selected element
Shift + Delete Cut
Ctrl + Insert Copy
Shift + Insert Paste
Alt + Backspace Undo
+ (numeric pad) Zoom In
- (numeric pad) Zoom Out
Alt + Shift + Back-
space Redo
Ctrl + 1 Open the label design for the next template within cur-
rent label file. Only applicable if you use the head-
er/main/tail or front/back labels.
Ctrl + Shift + 1 Open the label design for the previous template within
current label file. Only applicable if you use the head-
er/main/tail or front/back labels.
Ctrl + Shift + N Creates a new label with default settings, bypassing
wizards.