QuickLabel Designer Pro - Manual (Page 168)

- 168 -
graphics to our list. Select Add from Graphics menu or right-click Graphics side of the
window. Select some pictures (e.g. SAMPLE.PCX or PRINTER.BMP).
In the lower part of the window you can see information about selected font or graphics:
preview, used memory, width and height. Every element can be printed to label, just to
see if everything is all right. Use command Test print. Add some more fonts and graph-
ics to get a grip. Undesired elements can be removed from the list. Use Delete from
Font/Graphics menu or right click the element and select Delete.
7. When layout is complete and every font and graphics is in the list, we are ready for down-
load. You can download the whole list to the printer at once. Right-click left or right side
of the window and select Download All from the list. Or you can download one element
at a time by selecting it and clicking Download from Fonts/Graphics menu or right
clicking it and selecting Download from the list. If for some reason you want to remove
a downloaded element from memory card, but keep it in the list for later, use command
Remove.
Now let's do a status print. Printer will report some useful information of memory card
usage. Click Status Print from Card menu.
Memory card is now filled with elements (fonts and graphics) and is ready to be used from the label-
ing software.
1. Start the label designer
2. Create new label. Click New from File menu or click . Choose your printer from the
list. Select predefined label stock or design your own label.
3. We have to tell the label designer that our printer is equipped with memory card and
what kind of data is stored on the memory card.
Double-click the printer name in the status line in the bottom of the window. Click but-
ton Memory, and in section Slot 1 for Type select Memory Card and for Connected file
select SAMPLE. This is the name of the memory card file (.MMF) we created before.
Click OK to return to the label designer.
4. Using downloaded font.
Click Text icon or Paragraph icon and type in some
text. From text toolbar select the font, you downloaded to memory card before. If text
toolbar is not shown on your screen, switch it on using command Text tool in View
menu. You will recognize downloaded font by special printer symbol in front of its name
. To make sure, you have selected the proper font, the same symbol is shown in the
lower right corner of the element on the label. If the symbol is not there, you didn't select
the right font or you do not have switched on displaying of printer element. In this case
select Object properties in View menu and click Printer elements.
5. Using downloaded graphics.
Click Graphics icon and select the picture you downloaded to memory
card before. Click OK. Inserted picture is used from disk and not from memory card yet.
To change this double click the picture and select On memory card in General tab.
Click Browse and select the picture from memory card. To make sure you are using pic-
ture from memory card look at the picture on the label. It should be framed in blue box.
Regular picture doesn't have any frame.
If you need further explanation on how NiceMemMaster works please refer to NiceMemMaster doc-
umentation.