Comtech EF Data DTMX5000 SpectraCast - Manual (Page 96)

DTMX5000 MIB File DTMX5000 IP Gateway
4–16 Rev. 1
4.2.3.10 Auxiliary Null Packets Control
MIB Object: cbDVBAuxNullPackets
OID: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).
efdata(6247).spectracast(3).DTMX5000(1).cbConfig(2).
cbDVBOutputParam(2).
cbDVBAuxNullPackets(10)
Description: Specifies how the Transport Stream from the Auxiliary Input will be
combined with the output Transport Stream. If Enabled, the Gateway
will replace null packets in the incoming Transport Streams, with
Transport Stream packets containing data that were generated by the
Gateway.
This mode is effective only when Auxiliary Input is enabled.
The replacing of the null packets is performed together with the use of
free bandwidth. Replacing the null packets with packets containing
data enables increased utilization of the bandwidth.
Data Types: INTEGER
cbENable (1)
cbDisable (0)
Access: Read-write
4.2.3.11 Auxiliary Input Type
MIB Object: cbDVBAuxAuxinputType
OID: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).
efdata(6247).spectracast(3).DTMX5000(1).cbConfig(2).
cbDVBOutputParam(2).
cbDVBAuxInputType(11)
Description: Specifies which physical input of the Gateway will be used as the aux-
iliary input, either LVDS or ASI.
Note: The Gateway is shipped with the ASI physical interface only. If
LVDS is desired, a separate order must be made. The Gateway can
only use one input at a time.
Data Types: INTEGER
cbASI (1)
cbLVDS (0)
Access: Read-write