Comtech EF Data DTMX5000 SpectraCast - Manual (Page 66)

Operation DTMX5000 IP Gateway
Rev. 1 3–30
3.5.1.4.1 Show/Edit Groups
This option enables the user to display and modify the definitions for existing groups.
After selecting this option from the Groups Manipulations menu, use the [
←
] [
→
] on the
keyboard to scroll through the existing groups.
The following information is displayed for each group:
Heading
(in this case Group 1/3) Indicates the index number of the current group (1)
and the total number of existing groups’ (3).
Group Index The group’s identifying number.
PID Specifies the PID under which data for this group
will mapped.
Min Rate Specifies the minimum bandwidth allocated by the
unit’s for this group.
Max Rate Specifies the maximum bandwidth allocated by the
unit for this group.
QoS Mode:
Global
Individual
The unit calculates the total throughput of all the
group members and then, for QoS purposes, the
unit regards them as a single unit.
The group’s QoS parameters are not relevant and
each group member’s individual parameters will be
used.