Comtech EF Data DTMX5000 SpectraCast - Manual (Page 44)

Operation DTMX5000 IP Gateway
Rev. 1 3–8
3.2.2 Network Parameters
The Network Parameters define the overall operation of the DTMX5000.
C&M IP Address Specifies the IP address for the unit’s Control and Management NIC.
C&M Subnet Mask Specifies the size of the subnetwork of the LAN segment to which the
unit’s Control and Management NIC is connected.
Transportation NIC Specifies whether the DTMX5000 uses a separate data input NIC.
Transportation IP Address Specifies the IP Address for the unit’s Transportation NIC.
Transportation Subnet Mask Specifies the size of the subnetwork of the LAN segment to which the
transportation NIC is connected.
Default Gateway Specifies the default unit IP address.
Promiscuous Enables/disables Promiscuous mode.
Unregistered Users Specifies the way in which the unit handles packets received for
unregistered users.
Multicast Specifies whether the unit will forward all Multicast datagrams to clients.
Telnet Server Enables/disables remote unit configuration via a Telnet terminal.
FTP Server Enables/disables FTP transmission of files to and from the unit.
3.2.2.1 C&M IP Address
Path: Edit CFG.INI Parameters/Network Parameters/C&M IP Address.
Description: Specifies the IP Address for the unit’s Control and Management
NIC. This must be a valid IP address.
Enter the unit Control and Management IP address in place of
the factory default setting.
Note: The unit must be rebooted in order for settings to take effect.