Comtech EF Data DTMX5000 SpectraCast - Manual (Page 43)

DTMX5000 IP Gateway Operation
Rev. 1 3–7
3.2.1.8 Flushing
Path: Edit CFG.INI Parameters/General Parameters/Flushing.
Description: Enables/disables flushing. When flushing is enabled, flushing
datagrams (not null DVB packets) are transmitted on the
transport stream output whenever there is no valid data to
send. Otherwise, null packets are generated. The flushing
mechanism may be used for flushing the last datagrams from
buffers in DVB multiplexers. If these datagrams are not
flushed, they tend to cause TCP/IP performance degradation.
Select Enabled to enable flushing.
Select Disable to disable flushing.
Note: The unit must be rebooted in order for settings to take effect.
3.2.1.9 Gateway Description
Note: Provisional for later upgrade.
Path: Edit CFG.INI Parameters/General Parameteres/General
Parameters/Gateway Description
Description: Allows user to manually assign a name or description to the
Gateway.