Comtech EF Data DTMX5000 SpectraCast - Manual (Page 134)

Specifications DTMX5000 IP Gateway
A–4 Rev. 1
A.3 External Connections
Refer to Figure A-2 for a view of the back panel of the Gateway depicting the various
connection sockets.
Figure A-2. External Connections
110/220V Power Socket Connects the Gateway to a power outlet. Verify the 110/220V setting of the power
supply.
Keyboard Socket Connects the Gateway to an optional keyboard.
DVB LVDS This D-type 25-pin female connector outputs the transport stream as an LVDS
format.
AUX ASI Input [Asynchronous Serial Interface (ASI)] This coaxial connector can be used for
combining the external Transport Stream.
ASI Output This outputs the Transport Stream on an asynchronous serial interface.
Control and Management
(C&M) 10/100 BaseT Input
NIC J45 interface to the C&M LAN
Transportation (TX)
10/100BaseT Input NIC J45 interface to the Transportation LAN.
VGA Output Connects to the VGA display. To view the startup sequence, an optional VGA
display also can be connected to the Gateway.
COM1 Connects directly to the local terminal through an RS232 serial cable. The
DTMX5000 IP Gateway must be connected to a local terminal in order to perform
various configuration procedures.