Comtech EF Data DTMX5000 SpectraCast - Manual (Page 57)

DTMX5000 IP Gateway Operation
Rev. 1 3–21
3.4 Writing the CFG.INI Parameters
DTMX5000 parameters must be saved to the CFG.INI file after editing. These
parameters will take effect when the unit is rebooted.
3.4.1 Write Parameters to CFG.INI and Reset
Note: Select this option to save the edited parameters as the unit’s default. The unit
automatically restarts, and the changes take effect.
To write the parameters to CFG.INI and reset the unit immediately, proceed as
follows:
1. In the Main menu, select Configuration. The Configuration menu opens.
2. Select Option 3, Write Parameters to CFG.INI and Reset. The unit restarts and
the edited CFG.INI files take effect.