Comtech EF Data DTMX5000 SpectraCast - Manual (Page 33)

DTMX5000 IP Gateway Installation
Rev. 1 2–9
2.3.3.2 Starting the Telnet Connection
Note: Windows 95/98 or NT is required for the starting operation.
To start the Telnet connection, proceed as follows:
1. From the Windows Start menu, select the Run option.
2. In the command line, type Telnet. Press . The Telnet application opens.
3. Select the Preferences option from the Terminal menu. The Terminal Preferences
dialog box opens:
4. Select the VT100 Arrows check box.