Comtech EF Data DTMX5000 SpectraCast - Manual (Page 81)

Rev. 1 4–1
4
Chapter 4.
DTMX5000 MIB FILE
All DTMX5000 parameters can be configured and controlled remotely using any SNMP
Network Management System (NMS). The Gateway’s Management Information Base
(MIB) file contains all the relevant parameters.
4.1 Overview
All Gateway parameters, with the exception of the Gateway’s vital parameters, which are
protected for security reasons, can be configured using the NMS. The Gateway’s vital pa-
rameters can only be changes from a local terminal directly connected to the Gateway.
In general, all parameter configurations performed via the SNMP interface take effect
immediately, without the need to reboot the Gateway. This enables On-the-Fly Gateway
maintenance.
The parameters contained in the MIB are grouped as follows:
•
Operation Mode Parameters
•
Network Interface Configuration Parameters
•
DVB Interface Parameters
•
Multicast Channels Parameters
•
Group Parameters
•
Static Users Parameters
•
CCU Parameters
•
Software Download Parameters
•
Diagnostics Parameters
•
General Statistics Parameters
•
Client Data Flow Statistics Table
•
Client Configuration Parameters Table