Comtech EF Data DTMX5000 SpectraCast - Manual (Page 69)

DTMX5000 IP Gateway Operation
Rev. 1 3–33
3.5.1.5 Static Users Manipulations
Static users are users with fixed IP addresses, as opposed to dynamic users who are
allocated an IP address per session by the ISP.
Static Users Parameters for specific static users can be defined in the Gateway
via the terminal or the NMS. Static user parameters are stored in a
user table in the unit.
Dynamic Users The CCU identifies new users and their IP addresses and passes
this information on to the unit. If users have a fixed IP
address, this process can be bypassed.
Static users are managed using the Static Users Manipulations option of the Maintenance
parameters. For each static user, the IP address, mask and MAC address are specified and
the static user is included in a group. In addition, QoS parameters are defined for each
static user.
The Static User Manipulation Options consist of the following:
•
Show/Edit Static User
•
Find Static User
•
Add Static User
•
Delete Static User