Comtech EF Data DTMX5000 SpectraCast - Manual (Page 40)

Operation DTMX5000 IP Gateway
Rev. 1 3–4
3.2.1 General Parameters
The General Parameters define the overall operation of the Gateway.
Application File Name Specifies the name of the application file to be loaded the next time the
DTMX5000 will boot.
FPGA File Name Specifies which of the previously downloaded FPGA configuration files
will be loaded into the FPGA.
Data Broadcasting Mode Specifies the data-mapping mode of IP datagrams onto the output Transport
Stream.
Quality of Service Specifies whether the unit should implement best effort service or offer
QoS prioritizing.
Quality of Service Mode Specifies the mode of operation of the QoS algorithm.
Maximum Allowed Delay Specifies the maximum delay before a datagram is discarded.
Encryption Enables or disables encryption on the DTMX5000 Link.
Flushing Specifies whether to use the flushing option.
Gateway Description Allows user to provide description of Gateway.
3.2.1.1 Application File Name
Path: Edit CFG.INI Parameters/General Parameters/Application
File Name
Description: Specifies the name of the application file to be loaded on the
next boot.
Enter the name of the application file to be loaded.
Note: The unit must be rebooted in order for settings to take effect.