Comtech EF Data DTMX5000 SpectraCast - Manual (Page 37)

Rev. 1 3–1
3
Chapter 3.
CONFIGURING THE GATEWAY
USING A TERMINAL
DTMX5000 parameters can be configured through a menu driven interface through a
local terminal or remotely using using a Telnet terminal.
3.1 Overview
There are two-types of parameters that can be configured:
•
Configuration Parameters. These parameters determine the default behavior of
the Gateway. They are contained in the CFG.INI file, which is located in the root
directory of the unit’s internal hard drive.
•
Maintenance Parameters. These parameters enable the definition of groups, static
users, multicast users, and Telnet/FTP users. They also allow the enabling,
disabling, or resetting of the unit.