Comtech EF Data DTMX5000 SpectraCast - Manual (Page 48)

Operation DTMX5000 IP Gateway
Rev. 1 3–12
3.2.2.9 Multicast
Path: Edit CFG.INI Parameters/Network Parameters/Multicast.
Description: Enables/disables unregistered Multicast users. Multicast
broadcasting is an extension of the unicast mode of
transmission, which is the usual mode of transmission with
TCP/IP, from one point to one destination. With Multicast, a
datagram packet is sent to any users at once, for example: to
all members of the group. It enables the same message to be
sent to multiple users, for example: for video and audio
streaming.
Enabled When this parameter is Enabled, the unit forwards Multicast datagrams. Packets for
unregistered multicast users also will be forward using default QoS parameters and no
encryption.
Disabled When this parameter is Disabled, only datagrams for registered multicast users are
forwarded, while those for unregistered multicast users are discarded.
Note: The unit must be rebooted in order for settings to take
3.2.2.10 Telnet Server
Path: Edit CFG.INI Parameters/Network Parameters/Telnet Server.
Description: Enables/disables the user of a Telnet terminal for remote
control and configuration of unit parameters.
Note: The unit must be rebooted in order for settings to take effect.
3.2.2.11 FTP Server
Path: Edit CFG.INI Parameters/Network Parameters/FTP Server.
Description: Enables/disables the user of FTP for transmission of files to
and from the unit.
Note: The unit must be rebooted in order for settings to take effect.