Comtech EF Data DM240XR - Manual (Page 96)

DM240XR High-Speed Digital Modulator SNMP
MN-DM240XR– Revision 13 8–2
DESCRIPTION
"Voltage level in tenths of a volt."
SYNTAX INTEGER
RadString ::= TEXTUAL-CONVENTION
DISPLAY-HINT "255a"
STATUS current
DESCRIPTION
"ASCII String."
SYNTAX OCTET STRING
RadInterfaceCardType ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Terrestrial interface card type."
SYNTAX INTEGER{
v1InSerialRs422( '01'h),
v1InDirecTV( '02'h),
v1InG703( '83'h),
v1InHssi( '84'h),
v1InAsiParallelRs422( '07'h),
v1InAsiParallelLvds( '08'h),
v1InIpsat( '89'h),
piicInAsi( '93'h),
piicInParallelRs422( '94'h),
piicInParallelLvds( '95'h),
piicInHssi( '96'h),
piicInG703E1T1( '98'h),
piicInG703E2T2( '99'h),
piicInG703E3T3Sts1( '9A'h),
piicInSerialRs422( '9B'h),
piicInDirecTVAmc( '9C'h),
piicInGigEthernet( '9D'h),
piicOutAsi( 'D3'h),
none( 'ff'h)
}
RadRadioFreqHz ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"Radio Frequency in Hz."
SYNTAX OCTET STRING
radCarrierControl OBJECT-TYPE
SYNTAX INTEGER {
off(0),
on(1)
}
ACCESS read-write
STATUS current
DESCRIPTION
"Turns carrier on and off"
::= { radSNMPModNVStatus 1 }
radTransmitPower OBJECT-TYPE
SYNTAX RadPowerLevel (-300..50)
ACCESS read-write
STATUS current
DESCRIPTION
"Selects the Tx power level in tenths of dBm
from +5.0 to -20.0 (70/140MHz),
from -5.0 to -30.0 (L-Band).
from +0.0 to -25.0 (DM240XR 70/140MHz and L-Band).
There is an implied decimal point. For example, a value
of 39 represents a transmit power level of +3.9 dBm."
::= { radSNMPModNVStatus 2 }
radIFFrequency OBJECT-TYPE
SYNTAX INTEGER (50000000..180000000|950000000..2050000000)
ACCESS read-write
STATUS current
DESCRIPTION
"Selects IF frequency in Hz."