Comtech EF Data DM240XR User Manual
Page 117
DM240XR High-Speed Digital Modulator
Remote Operations
MN-DM240XR– Revision 13
9–3
Terrestrial Interface Type
Terrestrial Framing
Carrier Set Roll Off
Output Clock Source
Symbol Rate
AASI NULL PID (w/IPSat interface card only)
IPSat Burst Demod Count (w/IPSat interface card only)
IPSat Control PID (w/IPSat interface card only)
IPSat Enable (w/IPSat interface card only)
2621h
2640h
2641h
2642h
2643h
2656h
2657h
2658h
2659h
Command PCR Restamping
265Bh
Command Multi-PIIC Configuration (w/Multi-PIIC Interface
Card only)
265Ch
Command Terrestrial COP3 Ethernet Configuration
2B52h
Clear Terrestrial COP3 Ethernet Configuration
2B53h
Command Pilot Symbols
2B54h
Command Clear Latched Alarms
2C03h
Command Set Time
2C04h
Command Set Date
2C05h
Command Set Time and Date
2C06h
Command RF Switch Redundancy Mode (w/RF Switch
hardware only)
2F40h
Command RF Switch Fault Test (w/RF Switch hardware only)
2F41h
Command RF Switch Activate Side (w/RF Switch hardware
only)
2F42h
9.3
Detailed Command Descriptions
Opcode: <2400h>
(Query Mod All) Query a Modulator's Configuration and Status
Query Response
<1>
Number of
Nonvol bytes
Configuration Bytes
<4>
IF Frequency
Binary Value, units Hz in 1Hz steps.
50000000Hz to 180000000Hz 70/140
950000000Hz to 2050000000Hz L-Band
<2>
Reserved
TBD
<4>
Data Rate
Binary Value, 1bps steps
<4>
External
Reference
Binary Value, units Hz in 8000Hz steps, e.g. 1000000Hz,
1008000Hz, etc.
256000Hz to 10000000Hz