Comtech EF Data DM240XR - Manual (Page 137)

DM240XR High-Speed Digital Modulator Remote Operations
MN-DM240XR– Revision 13 9–23
<1> Output Clock
Source
0 = SCTE, 1 = SCT, 2 = None
Opcode: <2643h>
Command a Modulator’s Symbol Rate
<1> Symbol Rate Binary Value, 1bps Steps (This command will cause the
carrier to turn off.
Opcode: <2656h>
Command AASI NULL PID
<2> PID 0x0010 - 0x1FFF
Opcode: <2657h>
Command IPSat Burst Demod Count
<2> Num Burst
Demods
1 – 50
Opcode: <2658h>
Command IPSat Control PID
<2> PID 0x0010 - 0x1FFF
Opcode: <2659h>
Command IPSat Enable
<1> IPSat Enable 0 = OFF, 1 = ON
Opcode: <265Bh>
Command PCR Restamping
<1> PCR
Restamping
0 = Off, 1= On
Opcode: <265Ch>
Command Multi-PIIC Configuration
<1> Multi-PIIC
Mode
1 = Manual,
2 = Redundancy
<1> Redundancy
Mode
0 = Force Prime,
1 = Force Backup,
2 = Manual Revert,
3 = Auto-Revert
<1> Prime PIIC Slot 1 – 3
<1> Backup PIIC
Slot
1 – 3
Opcode: <2C03h>
Command Clear Latched Alarms
No Parameters
Opcode: <2C04h>
Command Set Time
<1> Hour 0 – 23
<1> Minute 0 – 59
<1> Second 0 – 59