Comtech EF Data DM240XR - Manual (Page 162)

DM240XR High-Speed Digital Modulator Front Panel Upgrade Procedure
MN-DM240XR– Revision 13 A–2
a. From the modulator's Main Menu, scroll right to the SYSTEM Menu.
b. Scroll down.
c. Scroll right to the HW/FW CONFIG Menu.
d. Scroll down.
e. Scroll right to the FEATURES Menu.
f. Scroll down displays the feature code.
The value displayed on the top line of this menu is the 12-digit Unit ID. It is displayed as on the
front panel of the modulator as 3 sets of 4 digits in a dot-delineated format as follows:
1 2 3 4 . 1 2 3 4 . 1 2 3 4
Your Radyne sales representative will ask you for this number along with your desired feature
set upgrades when placing your order.
3.
Once your order has been processed, you will be issued a 12-digit feature set upgrade
code. This code is only good on the modem for which it was ordered. To enter this code
from the front panel, perform the following:
a. From the modulator's Main Menu, scroll right to the SYSTEM Menu.
b. Scroll down.
c. Scroll right to the HW/FW CONFIG Menu.
d. Scroll down.
e. Scroll right to the FEATURES Menu.
f. Scroll down displays the feature code menu.
The value displayed on the top line of this menu is the 12-digit Unit ID. It is displayed on the front
panel of the modem as 3 sets of 4 digits in a dot-delineated format indicated in Step 2. The
second line is the data entry area and is displayed as 3 sets of 4 underscores in a dot-delineated
format.
g. Press . A cursor will begin flashing in the data entry area.
h. Using the numeric keypad, enter your 12-digit upgrade code.
i. Press .
If the code entered is correct, the display will display CODE ACCEPTED, otherwise the INVALID
CODE will be displayed..
Care should be taken to insure that the upgrade code is entered properly.
After three unsuccessful attempts to enter a code, the front panel
upgrade and demonstration capability will be locked out and it will be
necessary to cycle power on the modem in order to continue.
IMPORTANT