Comtech EF Data DM240XR User Manual
Page 42
DM240XR High-Speed Digital Modulator
User Interfaces
MN-DM240XR– Revision 13
4–20
4.3.4 RF Switch Menu Options and Parameters
REDUNDANCY MODE:
{MANUAL, AUTO REVERT, BACKUP}
Indicates the mode of operation for the RF redundancy switch.
ACTIVATE PRIME
Pressing ENTER causes the prime side of the RF switch to be
selected as online.
ACTIVATE BACKUP
Pressing ENTER causes the backup side of the RF switch to be
selected as online.
(BACKUP|PRIME) STATUS: {NORMAL, FAULT}
This is the status of the other DM240XR connected to the RF
switch.
FAULT TEST:
{NORMAL, FAULT}
Asserts the fault signal to the RF switch for testing purposes.
4.3.5 Monitor Menu Options and Parameters
EVENTS:
Event Buff:
Display logged events and faults.
ERASE EVENTS:
Clear Events:
Clear all logged events and faults from the event buffer.
+5V SUPPLY:
Display the currently measured +5 VDC power supply.
+12V SUPPLY:
Display the currently measured +12 VDC power supply.
-12V SUPPLY:
Display the currently measured -12 VDC power supply.
4.3.6 Alarms Menu Options and Parameters
CURRENT ALARM (Menu):
Displays Current Alarm Status.
TX MAJOR (Menu)
Status
Edit Table
OVERSAMPLE PLL:
{PASS/FAIL, UNMASKED/MASKED}
FPGA CFG:
{PASS/FAIL, UNMASKED/MASKED}
SYNTH PLL:
{PASS/FAIL, UNMASKED/MASKED}