Comtech EF Data DM240XR - Manual (Page 104)

DM240XR High-Speed Digital Modulator SNMP
MN-DM240XR– Revision 13 8–10
If the Multi-PIIC mode is redundancy, radPrimePiicSlot
selects the prime input slot."
::= { radSNMPModNVStatus 40 }
radBackupPiicSlot OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-write
STATUS current
DESCRIPTION
"If the Multi-PIIC mode is redundancy, radBackupPiicSlot
selects the backup input slot."
::= { radSNMPModNVStatus 41 }
radRadioFrequencyHz OBJECT-TYPE
SYNTAX Counter64
ACCESS read-write
STATUS current
DESCRIPTION
"Selects RF frequency in Hz."
::= { radSNMPModNVStatus 42 }
radLoFrequencyHz OBJECT-TYPE
SYNTAX Counter64
ACCESS read-write
STATUS current
DESCRIPTION
"Selects LO frequency in Hz."
::= { radSNMPModNVStatus 43 }
radLowSideMix OBJECT-TYPE
SYNTAX INTEGER {
highSide(0),
lowSide(1)
}
ACCESS read-write
STATUS current
DESCRIPTION
"Selects the high-side/low-side LO mix."
::= { radSNMPModNVStatus 44 }
radLocalIpAddress OBJECT-TYPE
SYNTAX IpAddress
ACCESS read-write
STATUS current
DESCRIPTION
"Selects the local IP address."
::= { radSNMPModNVStatus 45 }
radPilotSymbolsEnabled OBJECT-TYPE
SYNTAX INTEGER {
disable(0),
enable(1)
}
ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables pilot symbols at the physical layer."
::= { radSNMPModNVStatus 46 }
radPhysLayerScramblerBypass OBJECT-TYPE
SYNTAX INTEGER {
normal(0),
bypassed(1)
}
ACCESS read-write
STATUS current
DESCRIPTION
"Enables/disables the physical layer scrambler. The
modulator is considered in a test mode when the
scrambler is bypassed."
::= { radSNMPModNVStatus 47 }
radInnerFecBypass OBJECT-TYPE
SYNTAX INTEGER {