Comtech EF Data DM240XR - Manual (Page 47)

DM240XR High-Speed Digital Modulator User Interfaces
MN-DM240XR– Revision 13 4–25
When V3 is used, three contexts are supported: public, mib2,
and dev. Context, Authentication and Privacy are a portion of
each SNMPV3 message.
The public context will only allow the user to see the sysoid of
the unit. This is the most restricted access possible and only
allows the unit to be identified by a host SNMP Station.
The mib2 context allows a user with appropriate authentication
to access the mib2 OIDs and the SNMP OIDs. These are of
interest primarily to network operators not controlling the
satellite link.
The dev context allows a user with appropriate authentication to
access the device control portion of the MIB. These OIDs are
used to control the devices satellite link and operation.
TRAP VERSION {V1, V2}
This controls the type of message format used when a message
trap is generated by the equipment and bound for a SNMP Host.
Messages will only be sent if the unit has been authorized to do
so.
AUTHORIZATION {TRAPS OFF, TRAPS ON}
This controls the type of message format used when a message
trap is generated by the equipment and bound for a SNMP host.
Messages will only be sent if the unit has been authorized to do
so.
RD COMMUNITY {16 characters of name}
This menu is only displayed when SNMP VERSION is set to V1
& V2.
This is the community that a host must be acting within when an
OID variable is requested by a V1/V2 SNMP message.
RDWR COMMUNITY {16 characters of name}
This menu is only displayed when SNMP VERSION is set to V1
& V2.
This is the community that a host must be acting within when an
OID variable is being changed by a V1/V2 SNMP message.
WEB (Menu)
CONFIRMATION {ENABLE, DISABLE}
USER 1 {xxxxxxxx}
User to select user name. The user can modify the user names.
The user name can have up to 14 characters supporting alpha and