Comtech EF Data DM240XR User Manual
Page 164
DM240XR High-Speed Digital Modulator
Front Panel Upgrade Procedure
MN-DM240XR– Revision 13
A–4
2.
Contact Radyne with the Unit ID and Request a Demonstration.
The modulator's Unit ID can be found on the front panel as follows:
a.
From the modulator's Main Menu, scroll right to the SYSTEM Menu.
b.
Scroll down.
c.
Scroll right to the HW/FW CONFIG Menu.
d.
Scroll down.
e.
Scroll right to the FEATURES Menu.
f.
Scroll down.
The value displayed on the top line of this menu is the 12-digit Unit ID. It is displayed as on the
front panel of the modem as 3 sets of 4 digits in a dot-delineated format as follows:
1 2 3 4 . 1 2 3 4 . 1 2 3 4
Your Radyne sales representative will ask you for this number along with the features you wish
to demo.
3.
Once your order has been processed, you will be issued a 12-digit demonstration code.
This code can only be used one time and it is only good on the modulator's for which it
was originally requested. To enter this code from the front panel, perform the following:
a.
From the modulator’s Main Menu, scroll right to the SYSTEM Menu.
b.
Scroll down.
c.
Scroll right to the HW/FW CONFIG Menu.
d.
Scroll down.
e.
Scroll right to the FEATURES Menu.
f.
Scroll down.
The value displayed on the top line of this menu is the 12-digit Unit ID. It is displayed on the
front panel of the modem as 3 sets of 4 digits. The second line is the data entry area and is
displayed as 3 sets of 4 underscores in a dot-delineated format.
Press
Using the numeric keypad, enter your 12-digit demonstration code
Press
If the code entered is correct, the display will display CODE ACCEPTED, otherwise the display
will read INVALID CODE.
Care should be taken to insure that the demonstration code is entered
properly. After three unsuccessful attempts to enter a code, the front
panel upgrade and demonstration capability will be locked out and it will
be necessary to cycle power on the modem in order to continue.
IMPORTANT