Comtech EF Data DM240XR - Manual (Page 112)

DM240XR High-Speed Digital Modulator SNMP
MN-DM240XR– Revision 13 8–18
-- radPiicSlotClockActivity OBJECT-TYPE
-- SYNTAX INTEGER {
-- inactive( 0),
-- active( 1)
-- }
-- ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Indicates clock activity of an interface card in a slot."
-- ::= { radPiicSlotStatusEntry 3 }
--
-- radPiicSlotDataActivity OBJECT-TYPE
-- SYNTAX INTEGER {
-- inactive( 0),
-- active( 1)
-- }
-- ACCESS read-only
-- STATUS current
-- DESCRIPTION
-- "Indicates data activity of an interface card in a slot."
-- ::= { radPiicSlotStatusEntry 4 }
radRfSwitchActiveSide OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
backup(2)
}
ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the active input of the RF switch."
::= { radSNMPModStatus 17 }
radRfSwitchDistantSideFault OBJECT-TYPE
SYNTAX INTEGER {
normal(1),
faulted(2)
}
ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the fault status of the modulator
at the distant side of the RF switch."
::= { radSNMPModStatus 18 }
radRfSwitchConnectorSide OBJECT-TYPE
SYNTAX INTEGER {
primary(1),
backup(2)
}
ACCESS read-only
STATUS current
DESCRIPTION
"Indicates the side of the RF switch to which the
modulator is connected."
::= { radSNMPModStatus 19 }
radTerrEthPortStatus OBJECT-TYPE
SYNTAX INTEGER {
down(0),
unresolved(1),
half10m(2),
half100m(3),
full10m(4),
full100m(5),
half1gig(6),
full1gig(7)
}
ACCESS read-only
STATUS current
DESCRIPTION
"Shows the link status of the active Gig Ethernet card."
::= { radSNMPModStatus 20 }