7 mib-ii – Comtech EF Data CDD-562AL User Manual
Page 86

CDD-562AL/564A/L Multi-Channel Demodulator
Revision 0
Ethernet-based Remote Product Management
MN-CDD562AL564AL
7–4
Table 7-2 MIB-II SNMPv2 notifications
Cold Start
1.3.6.1.6.3.1.1.5.1
Link Up
1.3.6.1.6.3.1.1.5.4
Authentication Failure
1.3.6.1.6.3.1.1.5.5
The CDD-56xA/L supports these Alarms and Faults v1 traps / v2 notifications:
Table 7-3 Alarms and Faults SNMPv1 traps
cdd564aUnitAlarmTrap
6247941
cdd564aRxAlarmTrap
6247942
cdd564aLNBAlarmTrap
6247943
Table 7-4 Alarms and Faults SNMPv2 notifications
cdd564aUnitAlarmNotification
1.3.6.1.4.1.6247.94.2.1.1
cdd564aRxAlarmNotification
1.3.6.1.4.1.6247.94.2.1.2
cdd564aLNBAlarmNotification
1.3.6.1.4.1.6247.94.2.1.3
7.3.7
MIB-II
The demodulator agent uses RFC 1213, Management Information Base for Network Management of
TCP/IP-based Internets. This is known as “MIB-II” or “Public MIB support.” For detailed OID
information, see the MIB file.
The agent uses these Groups:
Table 7-5. MIB-II Support
Group
Comments
System Group
Mandatory for RFC1213
Interface
Mandatory for RFC1213
IP
Mandatory for RFC1213
ICMP
Mandatory for RFC1213
TCP
Mandatory for RFC1213
UDP
Mandatory for RFC1213
SNMP
Mandatory for RFC1213
Address Translation Group
Implemented but depreciated in MIB-II
EGP
Not applicable