Comtech EF Data CDD-562AL - Manual (Page 55)

CDD-562AL/564A/L Multi-Channel Demodulator Revision 0
IP Module Ethernet Interface MN-CDD562AL564AL
4–1
Chapter 4. IP MODULE ETHERNET
INTERFACE
4.1 Introduction
The CDD-56xA/L Satellite Demodulator’s integral IP Module Ethernet Interface is intended for closed
network Single Channel Per Carrier (SCPC) links. It concentrates traffic from two or four independent
demodulators into a single Ethernet port, making it ideal for networked VSAT applications. The
CDD-56xA/L can also be used in a Vipersat satellite bandwidth management system.
NOTE: For information specific to CDD-56xA/L IP Module operation when used in a
Vipersat system, please see Comtech EF Data publication MN/22137 – Vipersat CDD-
56X Series Satellite Network Demodulator Router User Guide.
4.1.1 Standard Features
• Two 10/100BaseT Ethernet Interfaces (RJ-45)
• Powerful network management:
o SNMP with public and private MIB
o Telnet interface for remote product M & C
o Web Server interface for complete product management
o Console Port interface for local network management
• Remote software/firmware upgrade via FTP
• Configuration backup and restore via FTP
• Event Logging to capture all IP Module activity
• Detailed Statistics of IP traffic
• IGMP support for Multicast
• Static IP routing for unicast and multicast