Comtech EF Data CDD-562AL - Manual (Page 195)

CDD-562AL/564A/L Multi-Channel Demodulator Revision 0
HTTP (Web Server) Interface MN-CDD562AL564AL
10–29
CAUTION
If you do not save these parameter changes to permanent storage, they will be lost
when the unit is reset or loses power. To save these changes to permanent storage,
go to the Admin | Save page and click Save PaP Parameters.
Decryption
Read-only; shows whether Decryption is available or unavailable.
R eceive K eys
Receive keys are used to decrypt traffic received from the Satellite Interface. A maximum of eight keys is
allowed per demodulator.
For each applicable key, enter the key value in hexadecimal format. 48 digits is the maximum length.
Click Set for each key value entered.
10.5.7 Configuration | WAN | HDLC
Use this page to configure the HDLC (High-Level Data Link Control) encapsulation parameters.