Comtech EF Data CDD-562AL - Manual (Page 28)

CDD-562AL/564A/L Multi-Channel Demodulator Revision 0
Introduction MN-CDD562AL/564AL
1–10
1.3.5.2 Rear Panel
External cables are attached to connectors on the rear panel of the unit.
See also: Chapter 3. Rear Panel Connectors and Pinouts.
CAUTION
The European EMC Directive (EN55022, EN50082-1) requires using properly shielded
cables for DATA I/O. These cables must be double-shielded from end-to-end, ensuring
a continuous ground shield.
Figure 1-9. CDD-564AL Rear Panel View
CDD-564AL (L-Band)
Name Type Function
AC
Chassis power
DC (Optional)
Ground #10-32 stud Common Chassis Ground
Rx 1 Type N female
L-Band Input
Rx 2 Type N female
Rx 3 Type N female
Rx 4 Type N female
Factory Test 9-pin Type D male Remote Interface (EIA-232) for Factory Test
Traffic RJ-45 female Ethernet Traffic
M&C RJ-45 female M&C Port
Console RJ-11 female Async Serial Console Port