Comtech EF Data CDD-562AL - Manual (Page 106)

CDD-562AL/564A/L Multi-Channel Demodulator Revision 0
Telnet and CLI Operation MN-CDD562AL564AL
9–4
9.2.2 Main Menu
Administration, keystroke: A
• Provides a basic set of standard administrative functions to the demodulator. When connected via
Telnet, navigation to this menu is restricted to the Admin user.
• See Section 9.2.2.1
Interface Configuration, keystroke: I
• Allows configuration of the Ethernet and Satellite interfaces.
• See Section 9.2.2.2
Route Table, keystroke: R
• Defines how the demodulator routes packets that it receives on its Ethernet and Satellite
interfaces.
• See Section 9.2.2.3
Protocol Configuration, keystroke: P
• Allows configuration of various protocols used by the demodulator. These protocols currently
include ARP and IGMP.
• See Section 9.2.2.4
Vipersat Configuration, keystroke: V
• Available only in Router-Vipersat Working Mode
• (Not shown) Viewable/selectable only when the demodulator is used in a Vipersat system.
• See Comtech EF Data publication MN/22137 – Vipersat CDD-56xAL Series Satellite Network
Demodulator Router User Guide.
Satellite Demod Configuration, keystroke: M
• Allows configuration and monitoring of the satellite base unit.
• See Section 9.2.2.6