Comtech EF Data CDD-562AL - Manual (Page 118)

CDD-562AL/564A/L Multi-Channel Demodulator Revision 0
Telnet and CLI Operation MN-CDD562AL564AL
9–16
9.2.2.1.6 Working Mode
NOTE: The CDD-56xAL demodulator only supports Router Mode.
On the Administration screen, type C for the Working Mode parameter:
CAUTION
Changing the Working Mode causes the unit to reboot.
At the prompt, type ‘Y’ to proceed, and then select the desired Working Mode.
• 1 -- Router – Small Network
• 2 -- Router – Large Network
• 3 -- Router – Point to Point
• 4 -- Router – Vipersat
Otherwise, press the [ESC] or [Enter] keys to stop the command and return to the Administration screen.