Comtech EF Data CDD-562AL - Manual (Page 46)

CDD-562AL/564A/L Multi-Channel Demodulator Revision 0
Rear Panel Connections MN-CDD562AL564AL
3–2
3.2 CDD-56xA/L Cable Connections
Table 3-1. Rear Panel External Cable Connections
Section
Service Type
/Function
Connector
Name
CDD-562AL
(L-Band)
CDD-564AL
(L-Band)
CDD-564A
(IF Band)
3.2.1
Rx IF
/RF Input
Rx 1
Type N
female Type N
female Type BNC
female
Rx 2
Type N
female Type N
female Type BNC
female
Rx 3 N/A
Type N
female Type BNC
female
Rx 4 N/A
Type N
female Type BNC
female
Section
Service Type
/Function
Connector
Name
Type for all CDD-56xA/L units
3.2.2
Terrestrial Data
/Ethernet Traffic and M&C
10/100 Ethernet RJ-45 female
Dedicated Management Port 10/100 Ethernet RJ-45 female
3.2.3
Utility
/Remote Interface for Factory
Test Remote Control
or
Factory Test 9-pin Type D male
NOT FOR CUSTOMER USE
Utility
/Async Serial Console Port
Console RJ-11 female
CAUTION
The European EMC Directive (EN55022, EN50082-1) requires using properly shielded cables
for DATA I/O. These cables must be double-shielded from end-to-end, ensuring a continuous
ground shield.