Comtech EF Data CDD-562AL - Manual (Page 31)

CDD-562AL/564A/L Multi-Channel Demodulator Revision 0
Introduction MN-CDD562AL/564AL
1–13
1.3.8 Fully Accessible System Topology (FAST)
The CDD-564A/L has a number of optional features. You can purchase the unit with only the desired
features enabled.
To upgrade the functionality of a unit, Comtech EF Data provides FAST (Fully Accessible System
Topology). FAST lets you purchase and activate options through special authorization codes. Contact
Comtech EF Data Product Support to purchase these unique, register-specific Fast Access Codes. Then,
use the HTTP Web interface to enter these codes into the unit.
For basic modems, you can order hardware options for installation either at the factory or in the field. You
can easily activate these options in the field.
Table 1-1 lists the available options: standard hardware (Base Unit), FAST and FAST-accessible options.
See also: Chapter 6. FAST Activation Procedure.
Table 1-1. CDD-564A/L Standard, FAST and FAST-accessible Hardware Options
Option Description and Comments
Installation
Method
Data Rate Data rate 16 kbps to 512 kbps Base Unit
BPSK and QPSK Modulation Type Standard
TPC Codec Turbo Product Codec for Rate 3/4 Standard
Turbo Product Codec for CCM (IESS-315 compliant)
Rate 5/16, 21/44 and 7/8
FAST
Turbo Product Codec for Rate 0.95 Hardware
IP Packet Processor 10/100 Base-T Interface Traffic and M&C Standard
-48 VDC -48 VDC Prime Power Supply Hardware
Data Rate Data rate 16 kbps to 1.1 Mbps FAST
Data Rate Data rate 16 kbps to 2.5 Mbps FAST
Data Rate Data rate 16 kbps to 5.0 Mbps FAST
Data Rate Data rate 16 kbps to 10.239 Mbps FAST
3xDES Data Decryption 3xDES-128 (NIST certified 3x core)
Available for the -EN version only FAST
IP Header Compression Uses proprietary IP Header Compressions
Version 1.3.1 and later
FAST
Payload Compression Uses proprietary Payload Compressions
Version 1.3.1 and later
FAST
8-PSK and 8-QAM 8-PSK/8-QAM Modulation FAST
16-QAM 16-QAM Modulation FAST
ViperSat ViperSat Software FAST