Comtech EF Data CDD-562AL - Manual (Page 51)

CDD-562AL/564A/L Multi-Channel Demodulator Revision 0
Rear Panel Connections MN-CDD562AL564AL
3–7
3.3.2 100V/240V Alternating Current (AC) Power Interface (Standard)
3 IEC Three-prong Connector 2 Press-fit Fuse Holder 1 On / Off Switch
Figure 3-2. CDD-56xA/L AC Power Interface
AC Power Specifications
Input Power 106 W maximum, 63 W typical
Input Voltage
100 V to 240 V AC, +6%/-10%, autosensing
(total absolute max. range is 90 V to 254 V AC)
Connector Type IEC
Fuse Protection
Line and neutral fusing
(2X) 5mm x 20mm Slow-blow type fuses:
T2 (2.00 Amp) (100 V or 240 V AC operation)
3.3.2.1 AC Operation – Applying Power
Figure 3-3. Applying AC Power to the CDD-56xA/L
To apply AC power to the CDD-56xA/L (Figure 3-3):
1. Plug the provided AC power cord female end into the unit.
2. Plug the AC power cord male end into the user-supplied power source.
3. Switch the unit ON.