Comtech EF Data CDD-562AL - Manual (Page 125)

CDD-562AL/564A/L Multi-Channel Demodulator Revision 0
Telnet and CLI Operation MN-CDD562AL564AL
9–23
Downlink Mcast, keystroke: none, read-only
• Shows Read-only status of Downlink Multicast as [Enabled] or [Disabled].
• This is enabled or disabled on the Administration | Feature Configuration screen.
9.2.2.4 Protocol Configuration screen
Go to the Protocol Configuration screen from the Main Menu.
IGMP, keystroke: I
• Opens the IGMP Information screen.
• See Section 9.2.2.4.1
ARP, keystroke: A
• Opens the ARP Table Utilities screen.
• See Section 9.2.2.4.2
Brouter Mode, keystroke: B
• Opens the (VLAN) Brouter Configuration screen.
• See Section 9.2.2.4.3